For cleaning, remove the cylinder. The construction of the revolver is such that the rifle cleaner must be introduced from the muzzle. Push both rifle cleaners right through the bore until they can be seen in the frame. When the cleaning rod is pulled back, the dirty front felt will be pulled off. With the second felt element that remains on the adaptor, the bore can be polished.
You can also push the cleaning rod with adapter through from the muzzle, screw a felt onto the adaptor while it is accessible in the frame and pull the clean felt back in the direction normally followed by the bullet. The chambers in the cylinder can also easily be wiped out with a Chamber Cleaner or Chamber Cleaner Superintensive.
For light soiling of the chambers we recommend the use of Chamber Cleaners Soft. Like Rifle Cleaners, these are made of elastic merino wool felt, which can also adapt itself to the smaller diameter of the breech. For heavier soiling, Chamber Cleaner Superintensive should be used. These are also made of merino wool felt and include brass fibres. In combination with Bore Cleaning Compund, exceptionally good cleaning results can be obtained!